Brigedport Mill New Parts, Lathe
Country/Region of Manufacture: United States | Machine Type: lathe | brigedport mill j head table parts, in very good condition, take a look on my store, we have over 250 variety of used parts and tooling for machinist shop, many different used parts and tools, for many different machines, and many different items, we may have what you are looking for,
$135.00
Seller’s: eBay.com
125-Φ30 Lathe Spindle, High-Speed Spindle, Lathe Head Assembly, With Flange
125-Φ30 Lathe Spindle, High-speed Spindle, Lathe Head Assembly, with Flange in Business & Industrial|CNC, Metalworking & Manufacturing|Metalworking Equipment Replacement Parts
$123.37
Seller’s: US eBay
South Bend Lathe 10K – Rebuild Parts Kit (Light 10)
If you are contemplating cleaning up that old South Bend sitting in your garage, this kit is what you will need to get the job done. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. | MPN: SBLK10K | Type: Lathe | Brand: ILION Industrial Services | Rebuild Kit for South Bend Lathe Model 10k Made in the USA by ILION Industrial Services, LLC – Horizontal & Vertical Drive – If you are contemplating cleaning up that old South Bend sitting in your garage, this kit is what you will need to get the job done. For owners of the light 10 South Bends who need to disassemble and refurbish their machine, this aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original condition when you go to reassemble it. These parts were designed to provide and retain adequate lubrication in critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the headstock are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will not find a better quality replacement wick anywhere. The remaining apron wicks, gearbox wicks, wipers, and oil control plugs are all hard white felt, precision die cut for a consistent close fit on most all versions of the Southbend 10k lathe that were produced in large quantities from the early 1950s through the 1980s. Now you dont have to buy a whole yard of felt to get what you need and then waste time trying to cut and custom fit the individual parts to your lathe. Weve done all of the work for you. These kits are very reasonably priced compared to OEM or used parts so dont miss out on a chance to pick up a complete kit for your lathe while they last. This kit is for the 10 k only so if you have a 9″ workshop lathe, please see our other auctions for those kits. Please email if you have other questions, Thanks! Included In The “10k” Kit 2 Precision Spring Loaded Capillary oil wicks 2.125″ long, .40″ diameter. 2 Die cut bed wipers for the 10k tailstock Die cut hard felt “donut” oil wick for the tailstock quill screw Die cut rubber bumper washer for the tailstock quill screw Die Cut Apron Clutch Gasket Die Cut Apron Oil Trough Wick 4 Die Cut Way Wipers for the Saddle. 2 Hard Fiber Washers for the Drive Countershaft (controls oil) Round felt wick for the Reversing Gears Square felts for shaft lubrication. Complete set of Felts for the Quick Change Gear Box (Shafts, Bosses, and Oil Passages) Transaction Information Free Shipping by USPS First Class Mail to any US address. Multiple purchases qualify for discounts on shipping. If you have any questions, please dont hesitate to contact me. I will be happy to answer any questions. Thanks for your consideration. Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.
$59.95
Seller’s: eBay.com
125/160/200 Machine Head HRB Bearing, Lathe Spindle, High-Strength Lathe Head Assembly, Cast
125/160/200 Machine head HRB bearing, lathe spindle, high-strength lathe head assembly, cast
$54.29
Seller’s: AliExpress
2 X Rotating Lathe Tailstock Center & Wrench Replacement Parts Lathe Machine Woodworking DIY
Description: Made with high quality precision bearings High speed bearing, balanced and smooth for effective turning Easy to install and replace, durable and long service life Suitable lathe machine for woodworking Mainly for processing lathe shaft parts Specification: Material: Alloy Size: 4.5 x 5cm / 1.77 x 1.96in Package Includes: 2 x Thimble Drill Bit 2 x Lathe Tailstock 2 x Mini Wrench Note: Please allow 1-3mm error due to manual measurement, make sure you mind before you bid. The colors may be different for the different display, please understand.
$18.14
Seller’s: Walmart
80/125/160 Lathe Spindle Assembly Lathe Parts Daquan Household Bead Machine
80/125/160 Lathe spindle assembly Lathe Parts Daquan household bead machine in Business & Industrial|CNC, Metalworking & Manufacturing|Metalworking Equipment|Metalworking Lathes
$180.00
Seller’s: US eBay
Brake Lathe Centering Cone (1.703″ X 2.750″) For Rotors & Drums Ammco 3904 – Car Lift Parts
Brake Lathe Centering Cone (1.703″ x 2.750″) for Rotors & Drums Ammco 3904 – Car Lift Parts – This is a Tapered cone that fits Ammco®* Brake Lathes and many other manufacturers with a 1″ shaft. Fits hubless brake disc and drums with 1.7″ — 2.75″ holes. Used in combination with Supporting cups to make a perfect cut! Replaces Ammco®* part # 3904 stamped on back of cone Fits: Ammco®* 3000, 4000, 4100, 7500, 7700, 4000e, 3850, 3860 May replace the Following manufacturer Part Numbers: Kwikway 101-0243-00 Hofmann/RJ West W 112 FMC/ John Bean 90924 FMC/John Bean 92010 Rels 44004 Van Norman 866446 Hunter 192-111-2 Performance 8554 Call us at (866) 902-6060 if you have any questions about this product or any other auto equipment questions. *Ammco ® is registered trademark of Hennessy Industries, Inc. CARLIFTPARTS is not associated in any way with Hennessy Industries, Inc. All names, numbers, symbols and descriptions are used for reference purposes only. It is not implied that any part listed is the product of these manufacturers. The parts we offer are an O.E. alternative; they are not produced by O.E. Manufacturers such as Ammco ®*, Coats®* or similar manufacturers respectively. Car Lift Parts Brake Lathe Parts, Centering Cones & Adapters, Ammco, Car Lift Parts, Brake Lathe Centering Cone (1.703″ x 2.750″) for Rotors & Drums Ammco 3904 – Car Lift Parts, car lift parts, parts for lifts, parts for tire changers, parts for ac machines, truck lift parts
$55.65
Seller’s: Car Lift Parts
2 X Lathe Tailstock Wrench Replacement Parts FOR Mini Lathe Machine Woodworking DIY
Description: Made with high quality precision bearings High speed bearing balanced and smooth for effective turning Easy to install and replace durable and long service life Suitable for mini lathe machine for woodworking Mainly for processing lathe…
$13.98
Seller’s: Walmart
Adjustable Bearing Live Zentrum Revolving Center Durable Replacement Parts Lathe Machine DIY
Description: Made of alloy material high hardness durable Easy to operate and highly efficient Holing depth can be regulated and adjustment Suitable lathe machine woodworking Compact size install on lathe machine Widely used lathe woodworking lathe…
$14.43
Seller’s: Walmart
Lathe Tailstock Center & Wrench Replacement Parts FOR Mini Lathe Machine Woodworking DIY
Lathe Tailstock Center & Wrench Replacement Parts FOR Mini Lathe Machine Woodworking DIY
$6.26
Seller’s: AliExpress