Symmetricom Syncserver S200 UPGRADED GPS NTP Server Network Time Receiver Clock [Refurbished]
Guaranteed Good GPS Sync Correct Date Displayed New iLotus GPS Receiver Installed Late Model Usually $4,385 Fully Working Good Cosmetic Condition Latest Firmware IPv6 Ready Photos show the actual item for sale Introduction Note: This unit has been upgraded with a new, latest generation GPS receiver module from iLotus. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037. Here’s a lightly used, late model (2016) fully working SyncServer S200 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation. Screenshots taken during my testing of the unit are provided below. The unit is in good cosmetic condition with just a few paint blemishes – and the VFD display is bright and clear. No antenna is included, but I would be happy to quote for including one if needed. The antenna voltage is 12V so you cannot use one of the generic 5V antennas commonly offered for sale. And for best results the antenna needs to be mounted outside with a complete view of the sky. The unit has been reset to the factory logon defaults (logon with admin:symmetricom) ready for your install. This unit is the TCXO version; it does not have a Rubidium oscillator. The installed firmware is v1.36 – the most recent version available. The listing comprises the items you see in the images (only). No printed manual is included but a copy may be downloaded here (https://www.prostudioconnection.net/0912/SyncServer_S200_S250_S250i_UserGuide.pdf) if required. No other cables, documents or accessories are included. Usually Sells for $4,385 Photos show the actual item for sale The SyncServer S200 sets the standard which is shared by Symmetricom’s other SyncServer network time servers. Easy To Set Up and Maintain SyncServers are the easiest to set up and maintain network time servers in the world. The front panel of the SyncServer S200 is designed to quickly bring the server online with a few front panel keystrokes or DHCP. To fully configure the unit, use the very intuitive web interface or the step-by-step wizards for the most common operations. Full details may be obtained from the User Manual (https://www.prostudioconnection.net/0912/SyncServer_S200_S250_S250i_UserGuide.pdf) Highly Robust and Secure The S200 provides reliable and secure network synchronization technology by combining multi-port, high-speed/ high-capacity network interfaces and versatile GPS timing receiver technology. Flexibility and Performance The multiple ports of the S200 provide the flexibility to adapt to different network topologies as networks grow and change. It supports a wide range of network protocols including IPv4 and IPv6, for easy management and seamless integration into your existing and future network. The high speed processor and a nanosecond clock assure high bandwidth NTP performance for hundreds of thousands of network clients. Assured Perfect Timing The Stratum 1 level S200 derives extremely accurate time directly from the atomic clocks aboard the GPS satellite system. Reliability is further enhanced via Stratum 2 operation by retrieving time from other user-designated time servers. All SyncServers can be upgraded to an internal Rubidium atomic oscillator to keep the time server accurate if the GPS signal is lost. Customer Tested Time Server Design The 5th generation Symmetricom SyncServer S200 has decades of design experience behind it. Customer input is evident in every detail. From the front and rear panel design configurations to the state-of-the art web interface, the S200 is unsurpassed in reliability, accuracy, security and ease of use. Features Next generation, High-Bandwidth NTP Time Server Stratum 1 Operation Via GPS Satellites 3 Independent 10/100Base-T Ports High-Resolution Vacuum Florescent Display Full numeric keypad IPv6 and IPv4 Compatible Secure Web-Based Management SSH, SSL, SCP, SNMP v3, Custom MIB, HTTPS, Telnet, FTP, and more Stratum 2 Operation via NTP Servers Nanosecond time accuracy to UTC Dedicated Sysplex Timer output Email Alerts for Alarms or Error Single Satellite Timing Dual USB ports
$658.00
Seller’s: ProStudioConnection LLC
Symmetricom Syncserver S200 Ocxo Upgraded Gps Ntp Server Network Time
New/Unused New Old Stock Tested/Guaranteed Upgraded GPS Receiver Correct Date and GPS Lock Guaranteed Latest Firmware v1.36 Usually $4,385 IPv6 Ready Photos show the actual item for sale. Description Note: This unit has been upgraded with a new, latest generation GPS receiver module from iLotus. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037. An unused, mint- condition, never deployed fully working SyncServer S200 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation. No antenna is included but I have the matched AT575 12V types listed separately. For best results the antenna needs to be mounted outside with a complete view of the sky. The unit has been tested – screenshots of the positive test results are provided below. The unit ships set to the factory l
$1,292.20
Seller’s: Ebay Us
Symmetricom Syncserver S200 GPS NTP Server Network Time Receiver Clock GOOD SYNC
Product Line: SyncServer | GTIN: 0744890350509 | Interface: Ethernet (RJ-45) | Brand: Symmetricom | eBay Product ID (ePID): 1103935523 | Country/Region of Manufacture: United States | Type: Server | EAN: 0744890350509 | MPN: 1520R-S200 | Processor Type: GPS | Form Factor: Rack Mount | Generation: SyncServer | Model: Symmetricom SyncServer S200 | Processor Manufacturer: Microsemi | Network Connectivity: Wired-Ethernet (RJ-45) | Device Connectivity: Serial (RS-232) |
$515.20
Seller’s: eBay.com
Gpsdo Gps Disciplined Oscillator Ntp Server Tf-Gnssdo-10 W/Ordinary
Description GPSDO GPS Disciplined Oscillator NTP Server TF-GNSSDO-10 with Ordinary OCXO and 32.8FT Antenna Features: – GNSS disciplined clock – High frequency accuracy – NTP; IRIG-B – High and low temperature resistance – OCXO; high precision – Support Beidou, GPS, GLONASS, Galileo and QZSS – In the case of unsatisfactory antenna installation, it can still receive available satellite signals – Supports the function of time-stamping external input trigger signals. Timestamp accuracy up to 10ns – Support web management interface – Meets G.811 PRC MTIE template – Meets G.811 PRC TDEV template – Very low phase noise (DOCXO) – Very high frequency stability (DOCXO) Specifications: – Time Accuracy: 15ns (1σ) – Timestamp Accuracy: 10ns – Timekeeping accuracy: ≤50us (OCXO); ≤5us (DOCXO) – Frequency Accuracy: Better than 1.0E-12 (24 hour average); better than 5.0E-10 (24 hour hold) – Short-term stability (t=1s): better than 1.0E-11 (OCXO); better than 2.0E-12 (DOCXO) – Phase Noise: OCXO: -110dBc/Hz at 10Hz, -140dBc/H
$329.07
Seller’s: eBay
Centerclick NTP200 GPS Based NTP Server Appliance
Meet your new Time Server. Included in the Box: Your NTP200, A DC power supply, A GPS antenna, The getting started guide. Supply Yourself: An Ethernet cable, A Micro-B USB cable (if needed). The NTP200 is ideal for hobbyist, time enthusiasts, and just anyone who wants accurate clock synchronization in their home or business to either supplement or replace Internet NTP synchronization. The NTP200 provides a compact stand-alone GPS-based NTP Stratum 1 network time-source. IPv4 and IPv6 supported, Static or DHCP. The NTP200 provides custom designed easy to use software that simply does one thing well, provide accurate NTP time services. Hardware Overview: All connections are on the back panel which include: DC Power input, Ethernet, USB-A for offline software upgrade, USB-MicroB for Local Console configuration, GPS Antenna. Software Overview: The view-only embedded webserver provides quick status information for the system, GPS, NTP, and Network as well as help information and 24-hour graphs of the NTP request rate, Time Jitter, and GPS Satellite counts. JSON-Encoded status data is also available so you can integrate with other systems. The admin console can: View system, NTP, and GPS info (same as on the web interface), View network status even if the network is down, Reboot or safely shutdown the appliance, Configure static IP addressing or DHCP, Configure network services such as SSH logins and HTTP, Configure location privacy on or off for the HTTP interface, Configure IP/MASK based NTP access control, Reset settings, Perform a software upgrade.
$194.99
Seller’s: Amazon
NTP Server GPS Timer Network Timing Standard Time 8 Network Ports
NTP server GPS timer network timing standard time 8 network ports Unbranded/Generic in Business & Industrial|Industrial Automation & Motion Controls|Drives & Starters|Drives & Motor Controls|Servo Drives & Amplifiers
$2,033.96
Seller’s: US eBay
Spectracom Securesync 033 Rubidium Gps Glonass Ntp Network Time Server
Model 1200-033 Good Condition Tested/Guaranteed Fully Working Rubidium Oscillator Option Double GNSS Receiver: GPS, GLONASS NTP Time Server 10MHz Disciplined Rb Oscillator Includes Rack Ears Introduction Here’s a lightly used SecureSync 1200-033 NTP server with the upgraded Rubidium Oscillator installed, which is in very good cosmetic condition. In my testing was able to track up to 15 satellites simultaneously from the GPS and GLONASS constellations. For your peace of mind the unit has been tested and confirmed to operate as expected – see screenshots below taken during testing of the actual item for sale. The firmware has also been updated to v5.9.4 which is the latest revision at the time of listing. The listing comprises the SecureSync server and rack ears as shown. No unpictured accessories, cables, documents or software are included. Full product information may be obtained from the User Manual https://www.prostudioconnection.net/1502/SecureSync_Manual.pdf Features Modular, secure synchr
$2,097.60
Seller’s: eBay
Symmetricom Syncserver S200 Ocxo Upgraded Gps Ntp Server Network Time
Lightly Used Very Good Condition Tested/Guaranteed Upgraded GPS Receiver Correct Date and GPS Lock Guaranteed Latest Firmware v1.36 Usually $4,385 IPv6 Ready Photos show the actual item for sale. Description Note: This unit has been upgraded with a new, latest generation GPS receiver module from iLotus. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037. An unused, mint- condition, never deployed fully working SyncServer S200 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation. No antenna is included but I have the matched AT575 12V types listed separately. For best results the antenna needs to be mounted outside with a complete view of the sky. The unit has been tested – screenshots of the positive test results are provided below. The unit ships set to the f
$894.60
Seller’s: eBay
Ntp Server Network Time Server Gps Beidou (1 Network Port) +50m
Description NTP Server Network Time Server GPS Beidou (One Network Port) + 50M/164FT Mushroom Antenna + Base Features: – NTP network time synchronization server – Supports GPS satellite, Beidou satellite and CDMA network (optional) – Its front panel with LCD display, buttons and indicator light – Buttons make it more convenient to operate – 100Mbps port: can process more than 10,000 timing requests per second – Its rear panel with antenna port for GPS/Beidou, 100Mbps network port, switch, spare fuse, socket and grounding terminal – Its motherboard adopts imported tantalum capacitors – Using 8pcs 32-bit chips (for ST), fully independent and isolated – Using FPGA + ARM technology to achieve nanometer accuracy – Supported all NTP clients in the market, such as for Windows, Linux, HIKVISION, Tiandy, Dahua, KEDACOM, and Uniview – NTP server’s size: 482 x 280 x 44mm/19 x 11 x 1.7″ Package Included: – 1 x NTP Server – 1 x 50m/164FT Mushroom Antenna – 1 x Base Payment Terms 1. We accept PayPal,Payoneer,Visa Card,
$366.76
Seller’s: eBay
Symmetricom Syncserver S200 Upgraded Gps Ntp Server Network Time
Guaranteed Good GPS Sync Correct Date Displayed New iLotus GPS Receiver Installed Late Model Usually $4,385 Fully Working Good Cosmetic Condition Latest Firmware IPv6 Ready Photos show the actual item for sale Introduction Note: This unit has been upgraded with a new, latest generation GPS receiver module from iLotus. It is therefore unaffected by the September 18th 2022 week number rollover event that caused most SyncServers to fail to sync to GPS and eventually to show an incorrect date. The new card is good for accurate GPS time and date reception until 2037. Here’s a lightly used, late model (2016) fully working SyncServer S200 NTP server that obtains highly accurate and traceable time from the GPS satellite constellation. Screenshots taken during my testing of the unit are provided below. The unit is in good cosmetic condition with just a few paint blemishes – and the VFD display is bright and clear. No antenna is included, but I would be happy to quote for including one if needed. The a
$708.40
Seller’s: eBay