Gorilla Super Glue With Brush & Nozzle Applicator, 10 Gram, Clear, (Pack Of 1)
Description Gorilla Super Glue Brush & Nozzle offers two easy ways to dispense for control and accuracy. Brush & Nozzle features a precision tip nozzle and fine bristle brush that allows the user to control their super glue application, making it perfect for any project. Use of the brush versus the nozzle is up to the users preference. The fine bristled brush is designed for controlled coverage with less mess. The precision tip nozzle is designed for quick, easy dispensing. Gorilla Super Glue Brush & Nozzle uses the same formula as original Gorilla Super Glue. Developed for long-lasting repairs in an instant, Gorilla Super Glue dries in 10-45 seconds and is reinforced with rubber for increased impact resistance. We call it Impact-Tough because it stands up to wear and tear unlike any other super glue. In addition to its high-performance formula, weve added an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability. Super glue, also referred to as cyanoacrylate glue, or CA glue, works on a variety of materials, including plastic, metal, fabric, stone, ceramic, paper, rubber and more. Its Gorilla tough, every time. If used and stored according to directions, the brush should not harden in the glue. It is not recommended to leave the brush out of the bottle unless it is being used for application. However if left open to air for 1-2 minutes, it remains usable. For high performance and usability, the adhesive needs to be protected from air. One way keep the air out of the adhesive is by packaging in thick plastic bottles. Because of this thick plastic bottle, it might appear that the bottle is only half full when new. The bottle is not completely filled on purpose to make it easier to squeeze the glue out. Gorilla Super Glue should not be used for intentional contact with the skin. Click on the Gorilla link at the top of this page to see other quality products from the Gorilla Glue Company.
$5.69
Seller’s: Amazon
Goof Off Super Glue Remover – 4 Oz. Can, Yellow (FG678)
Goof Off Super Glue Remover works the first time to remove the toughest cured adhesives and dried glues. This remover, trusted by crafters and Do-It- Yourselfers, helps avoid costly messes and mistakes from adhesives. It clears away the toughest glues like Super Glue, epoxy adhesive and Gorilla Glue. To use, directly apply to dried glue or adhesive then wipe with a cloth. Watch as this super adhesive glue remover works to remove the dried glue that had once left you puzzled. If you are looking for an adhesive remover, look no further. The Goof Off Super Glue Remover gets the job done. Keep away from children. Read and follow all label directions.
$7.98
Seller’s: Amazon
Goof Off Professional Strength Remover, 6 Fl. Oz., Latex Paint And Adhesive Remover
Description Goof Off Professional Strength Remover is a trusted product among professional tradesman and Do-It-Yourself project masters to eliminate costly messes and mistakes. It effectively removes the toughest dried latex paint, adhesives, asphalt, and tar. Effective remover for dried latex paint, caulk, stickers, decals, glue, tar, road grime, bugs and tree sap, this super strength remover can do it all. Safe to use on baseboards, metals, glass, brick, wood, concrete, grout, fiberglass, most automotive surfaces, fully cured varnish and oil painted surfaces. To use, always use safety goggles, then apply Goof Off Professional Strength Remover on a cloth and rub the surface lightly. See the results as you remove stuck-on messes faster and better than other competing products. Keep out of reach of children. Read and follow all label directions.
$4.40
Seller’s: Amazon
Qty 2 | Super Glue Instant Adhesive 0.07 Fl Oz Tube PK12 MPN:15185
Super Glue Instant Adhesive 0.07 fl oz Tube PK12 MPN:15185 – Offered by Verified Veteran-Owned Business. Instant Adhesive 0.07 fl oz Tube PK12. hardware, building consumables, hardware glue & adhesives
$18.98
Seller’s: GoVets
Maximum Bond Krazy Glue EZ Squeeze Gel, 0.14 Oz, Dries Clear
Advanced Formula Provides An Extra Strong, Durable, Shock-Resistant Bond On Ceramic, Glass, Metal, Plastic, Wood And Rubber. The Precision Tip Applicator Has An Extended, No-Clog Tip With An Easy-Open, Easy-To-Seal Hanger Cap. Dries Clear. Ez Squeeze Gelno-Run, Gel Formulation Is Great For Bonding Vertical Surfaces; Great For Porous Surfaces. Adhesive Type: Gel; Packing Type: Tube; Washable: Yes; Color On Application: Clear.
$5.84
Seller’s: Zuma Office Supply
Lash Extension Glue (0.17Fl.Oz / 5Ml) / 0.3 Sec Drying Time/Retention 7 – 8 Weeks/Maximum Bonding Power/Professional Use Only Black Adhesive/For Salo
WARNING: DO NOT USE THE PRODUCT FOR SELF-APPLICATION, THIS MAY CAUSE EYE IRRITATION OR BURNING. ONLY FOR PROFESSIONAL USE. NOT SUITABLE FOR SENSITIVE PEOPLE Drying time: 0.3 sec Lasting time / retention: up to 7-8 weeks (in laboratory) Lower Fumes Level: Very Low / Lowest Viscosity: Very Low / Thin Skill Level: Expert Best eyelash extension environment conditions: 64.4°F-73.4°F (18°C-23°C), humidity RH 47-70% Flexibility: High Color: Black Volume: 5 ml / 0.17 fl. oz. CAUTION: – For professional use only. Never use this product for self-application with individual lashes, and absolutely NEVER with CLUSTER or STRIP lashes – Adhesive may give off fumes. Always do lash extension in a well-ventilated room – Prevent contact with eyes or eyelids to avoid irritation – Always do a patch test to avoid individual sensitivity BASIC USE INSTRUCTIONS**: – The clients eyes must be tightly closed all the time and protected by eye pads – Shake the bottle well before use for 30-60 sec. and before each drop – After extension, fan eyelashes for 5-10 min – In case of eye or skin contact, flush with water for 15 minutes – Cap tightly. The glue is best stored in a cool place. If stored in a fridge, allow it to stay at room temperature for 1 hr. before use – Use within 2 months once opened – DO NOT subject lashes to moisture for 24 hr after extension – Use ONLY oil-free makeup removers and mascaras
$27.99
Seller’s: Amazon
Magic Adhesive Remover, Multipurpose Surface Adhesive Remover, Super Glue Remover Pro Strength Remover, Sticker Remover Tool For Removes Labels Decal
Magic Adhesive Remover, Multipurpose Surface Adhesive Remover, Super Glue Remover Pro Strength Remover, Sticker Remover Tool for Removes Labels Decals Residue Tape Chewing Gum Grease Tar (1PCS)
$6.99
Seller’s: Amazon
Krazy Glue KG58548R All Purpose Krazy Glue Precision-Tip Applicator 0.07Oz
Adhesives/Glues General Supplies Krazy Glue KG58548R All Purpose Krazy Glue Precision-Tip Applicator 0.07oz Office Supplies General Supplies Adhesives/Glues General Supplies All-purpose super-strength glue. Great for everyday household repairs.Forms an extra-strong bond on wood rubber glass metal plastic and ceramic.The airtight leak-proof cap keeps glue from drying out.Handy base holds the tube for easy storage.Dries clear.
$1.48
Seller’s: Office Direct Supply
Powerful Solvent Degreaser For 3D Printer Bed Surfaces – Removes Grease, Dirt, 3D Printer Adhesives, Glue Stick Glue, & More – Fusionlock Build Surfa
Description Introducing the revolutionary FusionLock Build Surface Cleaner by HotPoly3D! Say goodbye to struggling with stubborn 3D printer bed adhesives and hard-to-remove grease and dirt from your 3D printer bed plate! Our Build Surface Cleaner is a powerful degreaser and emulsifier that works on various build surfaces such as glass, PEI, Kapton tape, and masking tape. Unlike other solutions that can damage your build surface and strip it of its adhesion properties, FusionLock Build Surface Cleaner has been engineered to give your build surface a refresh without degrading its performance. It even works wonders for those who prefer not to use adhesives, keeping the build surface clean and free of contaminants before prints. Using the Build Surface Cleaner is easy. Simply shake the bottle well before use and spray it on the entire surface of your build surface. Then, wait 1-3 minutes for the product to soak, and begin wiping with a microfiber cloth under warm running water. Wipe the surface until visibly clean for optimal results. FusionLock Build Surface Cleaner was specifically created to remove our FusionLock Nano Adhesive, one of the strongest adhesives on the market. This custom adhesive remover/cleaner makes it effortless to remove any adhesives properly, saving you time and effort. We take pride in the fact that our Build Surface Cleaner is a safe and effective solution for all your 3D printing needs. Made with quality ingredients, it is sure to give you a hassle-free printing experience. At HotPoly3D, we are passionate about pushing the boundaries of 3D printing technology. Our goal is to make 3D printing accessible to everyone, from hobbyists to professionals. We believe that 3D printing has the power to revolutionize the way we approach manufacturing and design, and we want to be at the forefront of that change.
$23.99
Seller’s: Amazon
Qty 12 | Newell Elmers Carpenters Wood Glue, 4 Oz. (Min Order Qty 12) MPN:E7000
Newell Elmers Carpenters Wood Glue, 4 Oz. (Min Order Qty 12) MPN:E7000 – Offered by Verified Veteran-Owned Business. Elmers Carpenters Wood Glue, 4 Oz. (Min Order Qty 12) E7000 Shop Millions of Products. Free Shipping. Quantity Discounts. Instant Discounts.. office supplies, general office supplies
$65.88
Seller’s: GoVets